Product Range

Turnbuckle Adjusting Tool (5 or 6mm Hex) HB Lightning Series Hard Anodised Rear Hubs (1 Degree) (Pair) HB Lightning Series Hard Anodised Rear Hubs (2 Degree) (Pair) HB Lightning Series Hard Anodised Rear Hubs (3 Degree) (Pair)
#ED000011
A simple tool to adjust those turnbuckles. No need to use pliers. This tool is precision made to fit the 5 & 6mm hexes on Edit Ti Turnbuckles. Super snug fit to prevent tool slipping off the turnbuckle. Wider contact area to prevent pressure marking
#ED010041
These 1 degree rear hubs allow the tuning of the 'outboard toe-in' of your Hot Bodies D8 or Lightning buggy/truggy. Useful for bumpy terrain where you need to run as little as possible inboard toe-in. Features:CNC Manufactured from high quality 7075
#ED010051
These 2 degree rear hubs allow the tuning of the 'outboard toe-in' of your Hot Bodies D8 or Lightning buggy/truggy. Useful for bumpy terrain where you need to run as little as possible inboard toe-in. Features:CNC machined from high quality 7075 alloy.
#ED010061
These 3 degree rear hubs allow the tuning of the 'outboard toe-in' of your Hot Bodies D8 or Lightning buggy/truggy. Useful for bumpy terrain where you need to run as little as possible inboard toe-in. Features:CNC Manufactured from high quality 7075
HB Lightning Series Hard Anodised Rear Toe-in Bracket (54mm) HB Lightning Series Hard Anodised Rear Toe-in Bracket (56mm) HB Lightning Series Hard Anodised Rear Toe-in Bracket (59mm) HB Lightning Alloy Centre Diff Mounts (Buggy, RR & Pro)
#ED010071
This item sets the inboard toe-in of the HB Lightning series vehicles to 0 degrees. Useful for bumpy tracks. Or when grip is high and 'traction rolls' are not required. Features:CNC Machined from high quality 7075 alloy Durable, cool grey hard anodise
#ED010081
This item sets the inboard toe-in of the HB Lightning series vehicles to ~1.5 degrees. Useful for fairly flat tracks or when conditions are 'greasy' when you require more on-power traction. Features:CNC Machined from high quality 7075 alloy Durable,
#ED010091
This item sets the inboard toe-in of the HB Lightning series vehicles to ~2.5 degrees. Useful for when grip is low and more on-power traction is required. Features:CNC Machined from high quality 7075 alloy Durable, cool grey hard anodised finish.
#ED010131
Keeping your transmission free and efficient is the key to acceleration and top speed. These centre diff mounts keep the bearings aligned and grip the bearings just the right to ensure the bearings work correctly. These mounts are also stiffer than standard
Alloy Fuel Line Mounts (Anodised Grey) (Pair) Alloy Fuel Line Mounts (Anodised Purple) (Pair) Alloy Fuel Line Mounts (Anodised Blue) (Pair) Alloy Fuel Line Mounts (Anodised Green) (Pair)
#ED010141
These fuel tube holders allow the use of thicker fuel tube (6mm dia) on your vehicle without 'squeezing' the tube, thus restricting the flow of fuel to your engine. Also avalable in; Purple #ED010143, Blue #ED010144, Green #ED010145 & Red #ED010146 Features:CNC
#ED010143
These fuel tube holders allow the use of thicker fuel tube (6mm dia) on your vehicle without 'squeezing' the tube, thus restricting the flow of fuel to your engine. Also avalable in; Grey #ED010141, Blue #ED010144, Green #ED010145 & Red #ED010146 Features:CNC
#ED010144
These fuel tube holders allow the use of thicker fuel tube (6mm dia) on your vehicle without 'squeezing' the tube, thus restricting the flow of fuel to your engine. Also avalable in Grey #ED010141, Purple #ED010143, Green #ED010145 & Red #ED010146 Features:CNC
#ED010145
These fuel tube holders allow the use of thicker fuel tube (6mm dia) on your vehicle without 'squeezing' the tube, thus restricting the flow of fuel to your engine. Also avalable in; Grey #ED010141, Purple #ED010143, Blue #ED010144 & Red #ED010146 Features:CNC
Alloy Fuel Line Mounts (Anodised Red) (Pair) Alloy Steering Bellcrank Set (All Lightning Series) HB Lightning Series Threaded Shock Body Set (Front) (Buggy Only) HB Lightning Series Threaded Shock Body Set (Buggy Rear) (Stadium Front & Rear)
#ED010146
These fuel tube holders allow the use of thicker fuel tube (6mm dia) on your vehicle without 'squeezing' the tube, thus restricting the flow of fuel to your engine. Also avalable in; Grey #ED010141, Purple #ED010143, Blue #ED010144 & Green #ED010145 Features:CNC
#ED010151
Oily and deteriorated plastic servo savers can make your servo saver feel loose. Strengthen up your steering and increase steering consistency with this steering set. Features:Precision CNC Machined from 7075 Alloy. Retro-fit existing HB parts.
#ED010161
Fine adjustments are the key to winning races. These threaded shock bodies allow you to 'dial-in' exactly the correct amount of pre-load on your spring to give you the correct ride height for your chosen terrain. These shocks are for the front of the
#ED010171
Fine adjustments are the key to winning races. These threaded shock bodies allow you to 'dial-in' exactly the correct amount of pre-load on your spring to give you the correct ride height for your chosen terrain. These shocks are for the rear of the HB
Titanium Turnbuckle (4 x 40mm) Natural Finish (Pair) Titanium Turnbuckle (4 x 40mm) Purple Finish (Pair) TITANIUM TURNBUCKLE (4 X 40MM) Titanium Turnbuckle (4 x 40mm) Green Finish (Pair)
#ED020010
Lower the unsprung mass of your suspension and increase it's strength at the same time. Replaces HBC 8165 Features:Machined from Grade 5 (6Al4v) Titanium. 40% lighter than standard item. Wide adjusting contact area. Left hand thread identifying
#ED020013
Lower the unsprung mass of your suspension and increase it's strength at the same time. Replaces HBC 8016 Features:Machined from Grade 5 (6Al4v) Titanium. 40% lighter than standard item. Wide adjusting contact area. Left hand thread identifying
#ED020014
Lower the unsprung mass of your suspension and increase it's strength at the same time. Replaces HBC 8016 Features:Machined from Grade 5 (6Al4v) Titanium. 40% lighter than standard item. Wide adjusting contact area. Left hand thread identifying
#ED020015
Lower the unsprung mass of your suspension and increase it's strength at the same time. Replaces HBC 8016 Features:Machined from Grade 5 (6Al4v) Titanium. 40% lighter than standard item. Wide adjusting contact area. Left hand thread identifying
Titanium Turnbuckle (5 x 30mm) Natural Finish (Pair) TITANIUM TURNBUCKLE (5 X 30MM) TITANIUM TURNBUCKLE (5 X 30MM) Titanium Turnbuckle (5 x 30mm) Green Finish (Pair)
#ED020030
Lower the unsprung mass of your suspension and increase it's strength at the same time. Replaces HBC 8018-1 Features:Machined from Grade 5 (6Al4v) Titanium. 40% lighter than standard item. Wide adjusting contact area. Left hand thread identifying
#ED020033
Lower the unsprung mass of your suspension and increase it's strength at the same time. Replaces HBC 8018-1 Features:Machined from Grade 5 (6Al4v) Titanium. 40% lighter than standard item. Wide adjusting contact area. Left hand thread identifying
#ED020034
Lower the unsprung mass of your suspension and increase it's strength at the same time. Replaces HBC 8018-1 Features:Machined from Grade 5 (6Al4v) Titanium. 40% lighter than standard item. Wide adjusting contact area. Left hand thread identifying
#ED020035
Lower the unsprung mass of your suspension and increase it's strength at the same time. Replaces HBC 8018-1 Features:Machined from Grade 5 (6Al4v) Titanium. 40% lighter than standard item. Wide adjusting contact area. Left hand thread identifying
Titanium Turnbuckle (5 x 51mm) Natural Finish (Pair) TITANIUM TURNBUCKLE (5 X 51MM) Titanium Turnbuckle (5 x 51mm) Blue Finish (Pair) Titanium Turnbuckle (5 x 51mm) Green Finish (Pair)
#ED020040
Lower the unsprung mass of your suspension and increase it's strength at the same time. Replaces HBC 8017 Features:Machined from Grade 5 (6Al4v) Titanium. 40% lighter than standard item. Wide adjusting contact area. Left hand thread identifying
#ED020043
Lower the unsprung mass of your suspension and increase it's strength at the same time. Replaces HBC 8017 Features:Machined from Grade 5 (6Al4v) Titanium. 40% lighter than standard item. Wide adjusting contact area. Left hand thread identifying
#ED020044
Lower the unsprung mass of your suspension and increase it's strength at the same time. Replaces HBC 8017 Features:Machined from Grade 5 (6Al4v) Titanium. 40% lighter than standard item. Wide adjusting contact area. Left hand thread identifying
#ED020045
Lower the unsprung mass of your suspension and increase it's strength at the same time. Replaces HBC 8017 Features:Machined from Grade 5 (6Al4v) Titanium. 40% lighter than standard item. Wide adjusting contact area. Left hand thread identifying
Titanium Shock Shaft (3.5 x 55mm) TiNi Finish (HB Lightning Buggy Front) Titanium Shock Shaft (3.5 x 69mm) TiNi Finish (HB Lightning Buggy Rear & Stadium) Cross Shaft for 4 Bevel Gear Differential EFRA 2030 Tuned 3 Chamber Pipe c/w 3 Manifolds (On/Off-Road)
#ED030012
Achieve super smooth shock action and reliability with these Titanium shock shafts. Titanium Nitride coating reduces friction so the piston and oil do all the work allowing small changes in oil / piston set-up to be noticed. These are for HB Lightning
#ED030022
Achieve super smooth shock action and reliability with these Titanium shock shafts. Titanium Nitride coating reduces friction so the piston and oil do all the work allowing small changes in oil / piston set-up to be noticed. These are for All HB Lightning
#ED070030
Beef up HPI Savage and HB LIhgtning series differentials with these upgraded cross shafts! You'll get increased durability and peace of mind as you roar across the mud and dunes! Features:Manufactured from Grade 5 Titanium (6Al4V) for ultra-reliability.
#ED100027
Unleash the hidden horsepower in your 21 size engine. The EFRA 2030 pipe and manifold combination is perfect for 1/8th scale on-road and off-road engines. Increases performance at low rpm, giving excellent torque and mid range. Ideal for truck racing. Complete
EFRA 2031 Tuned 3 Chamber Pipe c/w 3 Manifolds (On/Off-Road) EFRA 2032 Tuned 3 Chamber Pipe c/w 3 Manifolds (On/Off-Road) EFRA 2032 Tuned 3 Chamber Pipe c/w Conical Manifold (Off-Road) EFRA 2029 Tuned 3 Chamber Polished Pipe c/w Soldering Ring (On/Off-Road)
#ED100037
Unleash the hidden horsepower in your 21 size engine. The EFRA 2031 pipe and manifold combination is perfect for 1/8th scale on-road and off-road engines. Increases performance right from mid-range to high rpm, giving excellent torque and mid range driveabilty
#ED100047
Unleash the hidden horsepower in your 21 size engine. The EFRA 2032 pipe and manifold combination is perfect for 1/8th scale on-road and off-road engines. Increases performance right through the rev-range to high rpm, giving excellent torque and mid
#ED100077
Unleash the hidden horsepower in your 21 size engine. This pipe and manifold combination is perfect for 1/8th scale on-road and off-road engines. Complete with conical manifold for maximum horsepower delivery. Not for the faint-hearted! The components
#ED100087
Unleash the hidden horsepower in your 21 size engine. The EFRA 2029 pipe is perfect for 1/8th scale on-road and off-road engines. Increases performance at high rpm, with the added bonus of increased efficiency and longer run time from a tank of fuel. Whether
EFRA 2030 Tuned 3 Chamber Polished Pipe c/w Soldering Ring (On/Off-Road) EFRA 2031 Tuned 3 Chamber Polished Pipe c/w Soldering Ring (On / Off-Road) EFRA 2032 Tuned 3 Chamber Polished Pipe c/w Soldering Ring (Off-Road) Short Polished Manifold Kit c/w Soldering Ring
#ED100097
Unleash the hidden horsepower in your 21 size engine. The EFRA 2030 pipe is perfect for 1/8th scale on-road and off-road engines. Increases performance at low rpm, giving excellent torque and mid range. Ideal for truck racing. Whether you are just
#ED100107
Unleash the hidden horsepower in your 21 size engine. The EFRA 2031 pipe is perfect for 1/8th scale on-road and off-road engines. Increases performance right from mid-range to high rpm, giving excellent torque and mid range driveabilty whilst having
#ED100117
Unleash the hidden horsepower in your 21 size engine. The EFRA 2032 pipe is perfect for 1/8th scale on-road and off-road engines. Increases performance right through the rev-range to high rpm, giving excellent torque and mid range driveabilty whilst
#ED100127
Unleash the hidden horsepower in your 21 size engine. This manifold is ideal for gaining maximum top end from your engine / pipe combination. Whether you are just replacing a dented / damaged manifold or looking for a manifold option this is the part
Medium Polished Manifold Kit c/w Soldering Ring Long Polished Manifold Kit c/w Soldering Ring Conical Polished Manifold Kit cw Soldering Ring (Off-Road) Medium Conical Polished Manifold Kit c/w Soldering Ring (Off-Road)
#ED100137
Unleash the hidden horsepower in your 21 size engine. This manifold is ideal for gaining maximum mid-range from your engine / pipe combination. Whether you are just replacing a dented / damaged manifold or looking for a manifold option this is the part
#ED100147
Unleash the hidden horsepower in your 21 size engine. This manifold is ideal for gaining maximum bottom end torque from your engine / pipe combination. Whether you are just replacing a dented / damaged manifold or looking for a manifold option this is
#ED100167
Unleash the hidden horsepower in your 21 size engine. This manifold is ideal for gaining maximum mid range and awesome top-end from your engine / pipe combination. Whether you are just replacing a dented / damaged manifold or looking for a manifold option
#ED100177
Unleash the hidden horsepower in your 21 size engine. This manifold is ideal for widening the mid-range power band of your engine, whilst still keeping awesome top-end from your engine / pipe combination. Whether you are just replacing a dented / damaged
AIR FILTER WITH MOISTURE GUARD 5 x 8 x 2.5mm Flanged Ball Bearing (2pcs) (Ceramic)(ABEC 5) 6 x 10 x 3mm Ball Bearing (2pcs) (ABEC 3) 6 x 10 x 3mm Ball Bearing (2pcs) (Ceramic)(ABEC 5)
#ED110030
Performance Air Filter complete with moisture guard for those really wet days. Moisture guard keeps all the really serious water and dirt from clogging up your filter without compromising performance. Easy to disassemble and maintain. Fits all .21,
#ED150199
Keep your vehicles running free and efficient at all times with 'Edit' high quality bearings. ABEC 5 (ISO Class 5) Rated, these bearings are of the highest precision useful for land based R/C models applications. They have tighter tolerances for fit
#ED150280
Keep your vehicles running free and efficient at all times with 'Edit' high quality bearings. ABEC 3 (ISO Class 6) rated, these bearings are of a higher precision than most manufacturers standard bearings with tighter tolerances for fit. Tighter tolerances
#ED150289
Keep your vehicles running free and efficient at all times with 'Edit' high quality bearings. ABEC 5 (ISO Class 5) Rated, these bearings are of the highest precision useful for land based R/C models applications. They have tighter tolerances for fit
8 x 16 x 5mm Ball Bearing (2pcs) (ABEC 3) 8 x 16 x 5mm Ball Bearing (2pcs) (Ceramic)(ABEC 5) HB Lightning Series Ball Bearing Set (ABEC 3) Foam Insert for 1/8th buggy tyres (Soft) (Pair)
#ED150850
Keep your vehicles running free and efficient at all times with 'Edit' high quality bearings. ABEC 3 (ISO Class 6) rated, these bearings are of a higher precision than most manufacturers standard bearings with tighter tolerances for fit. Tighter tolerances
#ED150859
Keep your vehicles running free and efficient at all times with 'Edit' high quality bearings. ABEC 5 (ISO Class 5) Rated, these bearings are of the highest precision useful for land based R/C models applications. They have tighter tolerances for fit
#ED151020
Keep your D8 or Lightning Buggy / Truggy running free and efficient at all times with 'Edit' high quality bearings. This set contains all the bearings you need to give your Lightning a complete re-furb at a fraction of the normal cost. High quality
#ED180010
Edit your off-road performance with tuned inner foams designed specifically for 1/8th scale rallycross racing! Die-cut for precision and co-designed by World Champion and multiple British National Champion Neil Cragg, these inner foams will maximise grip
Foam Insert for 1/8th buggy tyres (Medium) (Pair)
#ED180020
Edit your off-road performance with tuned inner foams designed specifically for 1/8th scale rallycross racing! Die-cut for precision and co-designed by World Champion and multiple British National Champion Neil Cragg, these inner foams will maximise grip